2017-11-09 OSLON(R) SSL 80 Datasheet Version 1.4 GW CS8PM1.PM Higher performance. Lower thermal resistance. Extended range of driving conditions. This OSLON SSL family new generation LED offers a prefocused radiation pattern making it the ideal choice for spot lighting applications. Higher performance. Lower thermal resistance. Extended range of driving conditions. This OSLON SSL family new generation LED offers a prefocused radiation pattern making it the ideal choice for spot lighting applications. Features: * Package: SMT ceramic package with silicone resin and silicone lens * Viewing angle at 50 % IV: 80 * Color: 3000 K - 6500 K (warm, neutral and cool white) * CRI: min. 70 * Luminous Flux: typ. 144 lm @ 5000 K, 85 C * Luminous efficacy: typ. 144 lm/W @ 5000 K, 85 C * Corrosion Robustness: Superior Corrosion Robustness * Lumen Maintenance: Test results according to IESNA LM-80 available Besondere Merkmale: * Gehausetyp: SMT-Keramikgehause mit Silikonverguss und -linse * Abstrahlwinkel bei 50 % IV: 80 * Farbe: 3000 K - 6500 K (warm, neutral and cool white) * CRI: min. 70 * Lichtstrom: typ. 144 lm @ 5000 K, 85 C * Lichtausbeute: typ. 144 lm/W @ 5000 K, 85 C Applications * Accent and effect lighting * Architectural lighting * Industrial lighting * Outdoor lighting Anwendungen * Akzent- und Effektbeleuchtung * Architekturbeleuchtung * Industriebeleuchtung * Auenbeleuchtung 2018-05-10 * * 1 Korrosionsstabilitat: Hochste Korrosionsbestandigkeit Lichtstromerhaltung: Testergebnisse nach IESNA LM-80 verfugbar Version 1.4 GW CS8PM1.PM Ordering Information Bestellinformation Type: Color Temperature Typ: Farbtemperatur Luminous Flux Ordering Code Lichtstrom Bestellnummer 1) page 24 1) Seite 24 IF = 350 mA, TJ = 85 C [K] V [lm] GW CS8PM1.PM-LRLT-A737-1 3000 130 ... 164 Q65112A1037 GW CS8PM1.PM-LRLT-XX57-1 3000 130 ... 164 Q65112A1036 GW CS8PM1.PM-LRLT-A636-1 3500 130 ... 164 Q65112A1035 GW CS8PM1.PM-LRLT-XX56-1 3500 130 ... 164 Q65112A1034 GW CS8PM1.PM-LRLT-A535-1 4000 130 ... 164 Q65111A7343 GW CS8PM1.PM-LRLT-XX55-1 4000 130 ... 164 Q65111A8245 GW CS8PM1.PM-LRLT-A434-1 4500 130 ... 164 Q65111A7335 GW CS8PM1.PM-LRLT-XX54-1 4500 130 ... 164 Q65111A8246 GW CS8PM1.PM-LRLT-A333-1 5000 130 ... 164 Q65111A7333 GW CS8PM1.PM-LRLT-XX53-1 5000 130 ... 164 Q65111A8247 GW CS8PM1.PM-LRLT-A232-1 5700 130 ... 164 Q65111A7327 GW CS8PM1.PM-LRLT-XX52-1 5700 130 ... 164 Q65111A8248 GW CS8PM1.PM-LRLT-A131-1 6500 130 ... 164 Q65111A7324 GW CS8PM1.PM-LRLT-XX51-1 6500 130 ... 164 Q65111A8249 Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. GW CS8PM1.PM-LRLT-XX57-1 means that only one group LR, LS, LT will be shippable for any packing unit. In a similar manner for colors where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any packing unit. E. g. GW CS8PM1.PM-LRLT-XX57-1 means that only one forward voltage group K2,L1,L2,M1,M2 will be shippable. Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. GW CS8PM1.PM-LRLT-XX57-1 bedeutet, dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen LR, LS, LT enhalten ist. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Durchlassspannungsgruppe geliefert. Z. B. GW CS8PM1.PM-LRLT-XX57-1 bedeutet, dass nach Durchlassspannungsgruppen gruppiert wird. In einer Verpackungseinheit ist nur eine der Durchlassspannungsgruppen K2,L1,L2,M1,M2 enthalten (siehe Seite 5). 2018-05-10 2 Version 1.4 GW CS8PM1.PM Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range Betriebstemperatur Top -40 ... 125 C Storage temperature range Lagertemperatur Tstg -40 ... 125 C Junction temperature absolute * Sperrschichttemperatur absolut * Tj, abs 160 C Junction temperature Sperrschichttemperatur Tj 135 C Forward current Durchlassstrom (TJ = 85 C) IF 100 ... 1300 mA Surge current Stostrom IFM 2000 mA Reverse current 2) page 24 Sperrstrom 2) Seite 24 IR 200 mA ESD withstand voltage ESD Festigkeit (acc. to ANSI/ESDA/JEDEC JS-001 - HBM, Class 3B) VESD 8 kV Note: * This is verified by testing 30 pieces. Pass criteria: No catastrophic failures allowed, luminous flux must be better than L70B50 after 1000 h. Anm: * Dieser Wert wird durch den Test von 30 Bauteilen abgesichert. Dabei durfen keine Totalausfalle auftreten und der Lichtstrom mu nach 1000 h uber L70B50 liegen. 2018-05-10 3 Version 1.4 GW CS8PM1.PM Characteristics (TJ = 85 C; IF = 350 mA) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Viewing angle at 50 % IV Abstrahlwinkel bei 50 % IV (typ.) 2 80 Forward voltage Durchlassspannung (min.) (typ.) (max.) VF VF VF 2.70 2.85 3.20 V V V Reverse voltage Sperrspannung (IR = 20 mA) (max.) VR 1.2 V Color rendering index Farbwiedergabe Index (3000 K - 6500 K) (min.) Ra 70 - Rth JS el 3.7 K/W "Electrical" thermal resistance junction / solder point (typ.) "Elektrischer" Warmewiderstand Sperrschicht / Lotpad (with efficiency e = 30 %) Note: Individual forward voltage groups see next page Anm.: Durchlassspannungsgruppen siehe nachste Seite 2018-05-10 4 Version 1.4 GW CS8PM1.PM Brightness Groups Helligkeitsgruppen Group Luminous Flux 3) page 24 Luminous Flux 3) page 24 Luminous Intensity Gruppe Lichtstrom 3) Seite 24 Lichtstrom 3) Seite 24 Lichtstarke 4) Seite 24 (min.) V [lm] (max.) V [lm] (typ.) IV [cd] LQ 121 130 85 LR 130 140 92 LS 140 150 99 LT 150 164 107 LU 164 180 117 Forward Voltage Groups Durchlassspannungsgruppen Group Gruppe (min.) VF [V] (max.) VF [V] K2 2.70 2.80 L1 2.80 2.90 L2 2.90 3.00 M1 3.00 3.10 M2 3.10 3.20 2018-05-10 5 4) page 24 Version 1.4 GW CS8PM1.PM Chromaticity Coordinate Groups 5) page 24 Farbortgruppen 5) Seite 24 2018-05-10 6 Version 1.4 GW CS8PM1.PM Color Chromaticity Groups 5) page 24 Farbortgruppen 5) Seite 24 2018-05-10 7 Version 1.4 2018-05-10 GW CS8PM1.PM 8 Version 1.4 GW CS8PM1.PM Group Name on Label Gruppenbezeichnung auf Etikett Example: LR-39-K2 Beispiel: LR-39-K2 Brightness Helligkeit Chromaticity Coordinate Farbort Forward Voltage Durchlassspannung LR 39 K2 Note: No packing unit / tape ever contains more than one group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. 2018-05-10 9 Version 1.4 GW CS8PM1.PM Relative Spectral Emission - V() = Standard eye response curve 4) page 24 Relative spektrale Emission - V() = spektrale Augenempfindlichkeit 4) Seite 24 rel = f (); TJ = 85 C; IF = 350 mA Erel GW CS8PM1.PM 1,0 : V : white 0,8 0,6 0,4 0,2 0,0 350 400 450 500 550 600 650 700 750 800 [nm] Radiation Characteristics 4) page 24 Abstrahlcharakteristik 4) Seite 24 Irel = f (); TJ = 85 C GW CS8PM1.PM [] -10 0 -20 10 20 30 40 50 60 70 80 90 1,0 -30 -40 0,8 -50 0,6 -60 0,4 -70 0,2 -80 -90 0,0 -100 2018-05-10 10 Irel Version 1.4 GW CS8PM1.PM Forward Current 4) page 24 , 6) page 24 Durchlassstrom 4) Seite 24 , 6) Seite 24 IF = f (VF); TJ = 85 C Relative Luminous Flux 4) page 24 , 6) page 24 Relativer Lichtstrom 4) Seite 24 , 6) Seite 24 V/V(350 mA) = f(IF); TJ = 85 C V GW CS8PM1.PM IF [mA] 1300 GW CS8PM1.PM V(350 ) mA 1200 1000 2,5 2,0 800 1,5 600 1,0 400 0,5 200 100 2,65 2,8 2,9 3,0 3,1 3,2 0 10 3,31 VF [V] : Cx - white : Cy - white 0,02 0,01 0,00 -0,01 -0,02 -0,03 0 10 0 40 0 60 0 80 00 10 00 13 F I 2018-05-10 0 80 00 10 00 13 F GW CS8PM1.PM 0,03 0 60 I Chromaticity Coordinate Shift 4) page 24 Farbortverschiebung 4) Seite 24 Cx, Cy = f(IF); TJ = 85 C Cx Cy 0 40 [mA] 11 [mA] Version 1.4 GW CS8PM1.PM Relative Forward Voltage 4) page 24 Relative Vorwartsspannung 4) Seite 24 VF = VF - VF(85 C) = f(Tj); IF = 350 mA VF [V] Relative Luminous Flux 4) page 24 Relativer Lichtstrom 4) Seite 24 V/V(85 C) = f(Tj); IF = 350 mA v GW CS8PM1.PM 0,3 v(85C) 0,2 1,0 0,1 0,8 0,0 0,6 -0,1 0,4 -0,2 0,2 -0,3 -40 -20 0 20 40 60 80 0,0 -40 -20 100 120 Chromaticity Coordinate Shift 4) page 24 Farbortverschiebung 4) Seite 24 Cx, Cy = f(Tj); IF = 350 mA GW CS8PM1.PM 0,03 : Cx - white : Cy - white 0,02 0,01 0,00 -0,01 -0,02 -0,03 -40 -20 0 20 40 60 80 100 120 Tj [C] 2018-05-10 0 20 40 60 80 100 120 Tj [C] Tj [C] Cx Cy GW CS8PM1.PM 1,2 12 Version 1.4 GW CS8PM1.PM Max. Permissible Forward Current Max. zulassiger Durchlassstrom IF = f (T) IF [mA] GW CS8PM1.PM 1400 1300 1200 1100 1000 900 800 700 600 500 400 300 200 100 Do not use below 100 mA 0 0 20 40 60 80 100 120 Ts [C] 2018-05-10 13 Version 1.4 GW CS8PM1.PM Package Outline 7) page 24 Mazeichnung 7) Seite 24 Approximate Weight: 25 mg Gewicht: 25 mg ESD information: LED is protected by ESD device which is connected in parallel to LED-Chip. ESD Information: Die LED enthalt ein ESD-Bauteil, das parallel zum Chip geschaltet ist. Corrosion robustness: Test conditions: 40 C / 90 % rh / 15 ppm H2S / 336 h = Stricter than IEC 60068-2-43 (H2S) [25C / 75 % rh / 10 ppm H2S / 21 days] = Regarding relevant gas (H2S) stricter than EN 60068-2-60 (method 4) [25 C / 75 % rh / 200 ppb SO2, 200 ppb NO2,10 ppb Cl2 / 21 days] Korrosionsfestigkeit: Test Kondition: 40C / 90 % rh / 15 ppm H2S / 336 h = Besser als IEC 60068-2-43 (H2S) [25C / 75 % rh / 10 ppm H2S / 21 Tage] = Bezogen auf das Gas (H2S) besser als EN 60068-2-60 (method 4) [25C / 75 % rh / 200ppb SO2, 200ppb NO2,10ppb Cl2 / 21 Tage] 2018-05-10 14 Version 1.4 GW CS8PM1.PM Recommended Solder Pad 7) page 24 Empfohlenes Lotpaddesign 7) Seite 24 foot print 2018-05-10 Cu area Reflow soldering Reflow-Loten solder resist 15 solder stencil Version 1.4 GW CS8PM1.PM Note: For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. For further information please refer to our Application Note "Handling and Processing Details for Ceramic LEDs". Anm.: Um eine verbesserte Lotstellenkontaktierung zu erreichen, empfehlen wir, unter StandardStickstoffatmosphare zu loten. Weitere Informationen finden Sie in der Applikationsschrift Handling and Processing Details for Ceramic LEDs". 2018-05-10 16 Version 1.4 GW CS8PM1.PM Reflow Soldering Profile Reflow-Lotprofil Product complies to MSL Level 2 acc. to JEDEC J-STD-020E OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 s 300 250 t OHA04612 Symbol Symbol Profile Feature Profil-Charakteristik Pb-Free (SnAgCu) Assembly Minimum ) Ramp-up rate to preheat* 25 C to 150 C Time tS TSmin to TSmax tS 60 Ramp-up rate to peak*) TSmax to TP Recommendation Maximum 2 3 100 120 2 3 Unit Einheit K/s s K/s Liquidus temperature TL 217 Time above liquidus temperature tL 80 100 s Peak temperature TP 245 260 C Time within 5 C of the specified peak temperature TP - 5 K tP 20 30 s 3 6 K/s 10 Ramp-down rate* TP to 100 C 480 Time 25 C to TP All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range 2018-05-10 C 17 s Version 1.4 GW CS8PM1.PM Taping 7) page 24 Gurtung 7) Seite 24 2018-05-10 18 Version 1.4 GW CS8PM1.PM Tape and Reel Gurtverpackung 12 mm tape with 600 pcs. on 180 mm reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Tape dimensions [mm] Gurtmae [mm] Tape dim ensions in m m W P0 12 + 0.3 / - 0.1 4 0.1 P1 P2 D0 E F 4 0.1 or 8 0.1 2 0.05 1.5 0.1 1.75 0.1 5.5 0.05 Reel dimensions [mm] Rollenmae [mm] Reel dim ensions in m m A W Nmin W1 W2max 180 12 60 12.4 + 2 18.4 2018-05-10 19 Version 1.4 GW CS8PM1.PM Barcode-Product-Label (BPL) Barcode-Produkt-Etikett (BPL) Dry Packing Process and Materials Trockenverpackung und Materialien Moisture-sensitive label or print L VE LE If ve ati el see . lab e H) nk, (R bla cod y bar dit mi hu e ed ag . RH % /60 Barcode label C rar ck rel 30 N s VE RS inf pa % ainITI TO of to ak 90 d ntNSUC < ns (pe TIO or d , cte itio U g coSEND an bje ing C nd 5 C su ss CO Ais baRE co ce y 40 be TU MI CThIS C < tor ll pro SE _ < urs ). urs Ho de urs Ho co 72 Ho urs te 48 e Ho 24 6 da e tim e th tim or ). 23 tim e at t wi ntC or l wi fac Flo tim s at or ca at re. Flo d tha ale el or nth nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic 5a is be or de 24 tin en pro ve l 6 Le de , e te co , g: un wh Le ve l ke r se da ure ba ed low ba Le ve mo % ba e al d ure Le ist en ref e e 10 tim se for ist ure ale op se for > , Mo se ure 3 is or . , is ha se Mo istist nk be nk rd g -03 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. wi 10 ba tor J-S thi, va p. elf Ye ar ks _ < e icat me , C 1 Ye ee urs Sh terlow tem ted at ed uir > 1 W Ho un Af Indno uir DE 1. d e 4 8 ref dy reqy is 2. JE bo e Mo ore tim 16 req : C/ e es dit2b a) St tim or mi is e IP ed or g e tim vic b) or Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo MO TO OP M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 A OSR Desiccant M OHA00539 Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte. Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. 2018-05-10 20 ) (X PR O D NO : (1 T) LO T P) : 12 (6 NO BA S O S 12 TY 34 (9 D) C: D/ 01 44 998 21 2100 5 14 2 110 0 (Q : 20 00 u L lt S iT Y O T P 67 L 6 E Bi D Bi n1 Bi n2 : Pn3 : Q 1: -1 20 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R0 ditio 0 C R PA 77 na RT l TE CK VA XT R: M (G ) G RO UP : 18 R -1 + Q -1 P DE M Y Muster )Q H : em R ic AM o n O d u p ct to o rs NO TC H 3G (X ) PR OD NO : Dimensions of transportation box in mm Width Length Height Breite Lange Hohe 195 5 195 5 30 5 T) (6 P) O : C: 8 99 D/ 21 (9 D) 00 21 S S em R ic AM on du O p ct to or NO s BA TC H 3G H 12 34 : 12 NO M u lt iT O P L E D P -1 + Q -1 Ad R0 dit ion PA 77 al CK TE VA XT R: Muster 1 T LO 11 00 (1 Version 1.4 GW CS8PM1.PM Transportation Packing and Materials Kartonverpackung und Materialien OHA02044